We are getting our electrical work done now, and I had a question regarding the Screenlogic protocol adapter. Can I just wire it direct from the protocol adapter to the Easytouch load center? My network switch and router are in the basement and that's where I planned on having the screenlogic protocol adapter. I am concerned if I was relying on wireless that it might not communicate very well with the outdoor wireless transceiver given the 50-60' distance and the fact that the indoor transceiver is going to be on the basement wall. I was just hoping to bring a 22 AWG 4 conducter wire from the screen logic to the easytouch panel. The protocol adapter will be in my network and so I am hoping that I will be able to utilize the ios app for controls.
We will have wifi out by the pool as I'm bring a Cat6 cable over from the planned pavilion location to my patch panel / network switch. I'll install an access point in the pavilion.
It seems reasonable to me. Thanks for any advice.
Bobby
We will have wifi out by the pool as I'm bring a Cat6 cable over from the planned pavilion location to my patch panel / network switch. I'll install an access point in the pavilion.
It seems reasonable to me. Thanks for any advice.
Bobby