I opened up the skimmer while the pump was off and water intake set to 75% skimmer, 25% main drain. Taking out the basket I found a small white thingamabob underneath that seemed to weigh a modest amount and have a floating valve of some sort in the middle and an adjustable intake opening on the bottom. The only info printed on it was "waterway".
Underneath the waterway were two pipes, each sticking up, and with nothing visible to adjust.
Note that the intake for the waterway does not fit either pipe..it's intake is in the center and the pipes are closer to the edges.
I suppose it might be possible for the waterway to be positioned such that the intake seal could be over one of the pipes but I'm not sure how tight a fit we'd be seeing or how easy it would be to precisely place.
Underneath the waterway were two pipes, each sticking up, and with nothing visible to adjust.
Note that the intake for the waterway does not fit either pipe..it's intake is in the center and the pipes are closer to the edges.
I suppose it might be possible for the waterway to be positioned such that the intake seal could be over one of the pipes but I'm not sure how tight a fit we'd be seeing or how easy it would be to precisely place.