Salt cell replacement

[Ccorbin28]

I made the switch from a Jandy 1400 SWG to the RJ 60 Plus this year. The Jandy salt cells were not lasting more than a year. Cutting out the old Jandy unit and installing the RJ unit took about 3 hours for me which included 1 trip to lowes for some elbows and a union to make the plumbing work.

Just by appearance do you think i will have room to plumb in the RJ60 and the flow sensor?

Thanks for the advice, i look forward to this project!

 

[NCMike]

Just by appearance do you think i will have room to plumb in the RJ60 and the flow sensor?

Thanks for the advice, i look forward to this project!

Best thing to do is get out the tape measure. It looks tight. The cell is 15 3/4 inches and the flow switch is 4 inches. Id want 2 feet between the elbow and the jandy valve to feel safe doing the plumbing where the flow switch is after the cell per the manual. Hopefully you have the room. Theres plent of installation videos online to watch also before you dive into it.