We have a Pentair ichlor, and it currently has the cell status flashing green, and the output reads "cell". Any suggestions on the possible problem? Thanks in advance!
Salt cell concerns
- Thread starter Justin D
- Start date
- Jul 21, 2013
- 66,362
- Pool Size
- 35000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
Start with checking your salt level using a salt test kit or meter.
Check the cell for scale. If it needs cleaning read SWG How It Works - Further Reading
Check the cell for scale. If it needs cleaning read SWG How It Works - Further Reading
Similar threads
