Return Jets

[Yinn]

I have a pool where the returns are 1.5” pvc outlets without threads. Ive been using these eyeballs, which are self-aligning.

I’m looking to convert it to a threaded outlet so I can use a different type of return jet, as well as make it easier to close the pool - popping those eyeballs in and out are a pain.

Can anyone speak to how I can do that? Right now I’m thinking I would cement in a 1.5” male spigot adapter in. But want to make sure before I do something stupid.

 

[ajw22]

How deep can you glue a threaded pipe into your existing return and have the threads flush with the pool wall?

I would not think you have enough room.

 

[PoolGate]

I am in the same boat but mine are only 1" PVC. I think you will constrict the outlet a lot by both threading in screw fittings and then screwing in the eyeballs. I just ordered a couple press in eyeballs so I'll be taking them in and out as well.

 

[RDspaguy]

Unless you are chiseling out plaster and gunite you do not want to do that. Come to think of it, you do not want to chisel out plaster and gunite, so just don't do it. Much easier to fight with eyeballs.