Replacing Pump Motor, Need Specific Replacement Motor Model and P/N.

[rcsupool]

The motor is running but emits a high noise, and it's about 8 years old. Have been advised to wait until it stops working to change the motor.
Google searches are not coming up with the right replacements for new motor. Please see the attached image of the pump label.
Which gaskets or other components should I replace when installing the motor?

 

[ajw22]

Century (A.O. Smith) 2.0 HP Full Rate Motor, Square Flange 56Y Frame, Single Speed - Model B2748 - INYOPools.com

Century 2.0 HP Square Flange 56Y Full Rate Motor - B2748

www.inyopools.com

Pentair SuperFlo, Sta-Rite SuperMax Heavy-Duty & Saltwater Seal Kit - Model GOKIT78SALT - INYOPools.com

Saltwater Tune Up Kit for Pentair SuperFlo

www.inyopools.com

 

[JamesW]

Consider going to variable speed.

 

[JamesW]

TFP is a registered 501(c)3 non-profit that is maintained by user donations.

The people who answer questions are volunteers.

If you find the site to be a good resource, please consider making a donation to help support the site.

Thanks.

Become a TFP Supporter

Help Support TFP Trouble Free Pool is run by a dedicated group of volunteers that … Read more…

www.troublefreepool.com

 

[1poolman1]

The motor is running but emits a high noise, and it's about 8 years old. Have been advised to wait until it stops working to change the motor.
Google searches are not coming up with the right replacements for new motor. Please see the attached image of the pump label.
Which gaskets or other components should I replace when installing the motor?

Century EVQ225. GO KIT78V-9 (seal and O rings). Do you have automation?

 

[rcsupool]

Century EVQ225. GO KIT78V-9 (seal and O rings). Do you have automation?

I have an Intermatic Clock running the pool pump.

 

[rcsupool]

Century EVQ225. GO KIT78V-9 (seal and O rings). Do you have automation?

I have an Internatic clock.

 

[1poolman1]

I have an Internatic clock.

You can use the Century motor with a time clock. It will then use its internal programming to run and change speeds. There are choices you can make to that programming, but it is limited to what is already set in the pump. There is usually a choice that will fit your needs as there are several to choose from.