I want to replace both of these ball valves but not sure what type of connection ends to order and if there are adapters I need to order. Are these each externally threaded and screwed into equipment on the left side of the pics and internally threaded for an adaptor to allow hose to slip-on and clamp on the right side? Any help would be appreciated!
Replacing Hayward SP723-E Ball Valves
- Thread starter Pool Man Tom
- Start date
- Jul 21, 2013
- 65,729
- Pool Size
- 35000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
Show us what devices they are connected to that is cutoff on the left side of the picture.
You can see the hose clamps securing the right side.
They both unscrew from the devices on the left side.
Remove them and you can examine the parts buildup.
You can see the hose clamps securing the right side.
They both unscrew from the devices on the left side.
Remove them and you can examine the parts buildup.