So here is my situation... I have an 30 year old pool with an integrated aluminum pool coping. The previous home owner has been using a liner lock "the white rubber liner lock" to keep the liner in the track. The deck is in rough shape with a lot of cracking and sagging in places and the deck is starting to pull away from the deck in a couple places, probably leading to the need for the rubber liner lock.
So is this a total renovation project? Tear out all the deck, coping and replace liner and coping (non integrated) and have the deck replaced.
Or can I get by with repairing? Cutting out around the decking to replace the coping and liner and just resurface resurface the pool deck?
Has anyone done this and what is the cost?
I haven't had any issues with the liner falling out with the liner lock installed, so should I just leave it fill the cracks and gaps with sealant and wait until it fails?
So is this a total renovation project? Tear out all the deck, coping and replace liner and coping (non integrated) and have the deck replaced.
Or can I get by with repairing? Cutting out around the decking to replace the coping and liner and just resurface resurface the pool deck?
Has anyone done this and what is the cost?
I haven't had any issues with the liner falling out with the liner lock installed, so should I just leave it fill the cracks and gaps with sealant and wait until it fails?