Removing Nature Fusion 2 and installing Stenner 15Gallon Tank

[LeMuttman]

Three weeks into managing the pool myself, thanks TFP, I am ready to install a Stenner 15 gallon tank & pump and make things a bit easier. What i would like to do is remove the Fusion 2 and turn the Jandy 460 around (180 Degrees). If i do this i should be able to move it over giving enough room for the 15 gallon tank. I have to assume the only reason it is in this configuration is to get the Fusion into the proper flow path (after the filter)

Anyone see any problems with my idea?

 

[jblizzle]

Where is the drain plug on the filter located? That is the only concern I have but there's really no problem with turning the filter around 180 degrees.

 

[LeMuttman]

Good question - the drain is currently facing away. Turning the unit will force the drain to fact the pump motor.

 

[jblizzle]

I think the filter might still be far enough away that draining toward the pump would not be a problem.

 

[rphpool]

Is there room to put the Stenner tank on the left side of the filter? It appears you have power on the wall ( Stenner cord should reach ) and you have pool return just in front of filter ( Stenner comes with plenty of tubing ). You should not have to remove the Fusion unless you just want to get it out of the way. If you do remove the Fusion it looks like enough room to put tank in that spot.