Getting ready to install new VSP, trying to figure out how to setup the plumbing, I want to use a Jandy valve. I have two suction lines coming from pool, one main drain and one skimmer. They are now connected to each other with a 1 1/2 inch “T” with each having its own shutoff valve. To give the new pump more of a straight run before the pump inlet, I would like to install a Jandy valve further from the inlet.
On the pic, can I just elbow the pipe on the left and run it into a Jandy valve installed on the pipe on the right? With this setup would I still be able to control the draw of water from each pipe? Example: could I draw 75% from the skimmer and 25% from the main and vice versa? I have no other water features other than a side cleaner (Polaris).
On the pic, can I just elbow the pipe on the left and run it into a Jandy valve installed on the pipe on the right? With this setup would I still be able to control the draw of water from each pipe? Example: could I draw 75% from the skimmer and 25% from the main and vice versa? I have no other water features other than a side cleaner (Polaris).