When I pressed and held all three buttons on the keypad the display moved to "REM OFF". N ow I can't change it to anything else. None of the temperature buttons or Mode button seem to do anything. This a a gas run pool heater Model P-R407A
Raypak showing REM OFF on panel. Can't change it.
- Thread starter JHezaway
- Start date
- Jul 21, 2013
- 53,274
- Pool Size
- 35000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
Welcome to TFP.
Try...
Activating the Remote
To activate or deactivate the remote function:
1. Press and hold the UP and DOWN arrow buttons for 3 to 5 seconds.
Top right of page 26 in http://cdn.globalimageserver.com/FetchDocument.aspx?ID=4d173077-3962-4c79-88d6-00fa9f24eb5b
If you are going to hang around here please create your signature with details of your pool as it will help us help you with more specific advice.
Try...
Activating the Remote
To activate or deactivate the remote function:
1. Press and hold the UP and DOWN arrow buttons for 3 to 5 seconds.
Top right of page 26 in http://cdn.globalimageserver.com/FetchDocument.aspx?ID=4d173077-3962-4c79-88d6-00fa9f24eb5b
If you are going to hang around here please create your signature with details of your pool as it will help us help you with more specific advice.