Ran pump for an hour with no water flow...

kellyfair

Gold Supporter
Silver Supporter
Bronze Supporter
TFP Guide
Jun 29, 2016
5,424
Tampa, FL
Pool Size
7500
Surface
Vinyl
Chlorine
Salt Water Generator
SWG Type
CircuPool Edge-25
Extremely boneheaded move. I closed the intake and outlet valves on my pool today to disconnect the salt water cell and clean it. When I reassembled, you guessed it, I didn't open the valves again. Just took the dogs outside and saw red light and two hoses spraying water through small cracks (hose from pool to pump, and hose from pump to sand filter.)

The water in the hoses was HOT. Have I murdered my poor pump?

Seriously kicking myself right now.
 
Oh, you don't know how much better you just made me feel!

Replacement hoses should arrive tomorrow, so crossing fingers that all will be well!
 
Thread Status
Hello , This thread has been inactive for over 60 days. New postings here are unlikely to be seen or responded to by other members. For better visibility, consider Starting A New Thread.