Hello, somewhere in pool school there is a section on how to add pool chemicals which I can't locate. Can you tell me how to add calcium increaser to avoid a cloudy pool. Thanks.
Raising hardness level
- Thread starter JeanZ1
- Start date
- Feb 6, 2015
- 6,154
- Pool Size
- 12300
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- CircuPool RJ-45 Plus
Why do you think you need to add CH increaser?
Your recent PoolMath numbers look good and CSI is in range.
Remember, pH test is not accurate when FC > 10 ppm.
Your recent PoolMath numbers look good and CSI is in range.
Remember, pH test is not accurate when FC > 10 ppm.
Brian PacNW
Silver Supporter
Is section 8 of this wiki page what you’re looking for?
www.troublefreepool.com
Calcium Hardness - Further Reading
www.troublefreepool.com
Over thinking it I guess! It seems to have dropped to 275ppm from 300ppm (though not sure why, haven't backwashed and been adding tap water to bring level up) so thought I'd bring it back up to 300. I'll let it ride for now. Thanks.
Yes! Thank-youIs section 8 of this wiki page what you’re looking for?
Calcium Hardness - Further Reading
- May 3, 2014
- 58,480
- Pool Size
- 6000
- Surface
- Fiberglass
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-40
Recommended Pool Chemicals
Which should I buy? TFP's recommended pool chemicals are cheap, easy, and won't unbalance your pool water.
www.troublefreepool.com
Each section explains how to add the product to the pool.
Similar threads
