What is the adjustment to valves to increase the amount of circulation in spa to cause more of a spillover to pool during pool mode? We have a pool and spa combo where spa is raised. Our return valves are pool, spa and bubbler. We have a single pump.
Pushing more circulation to spa during pool mode
- Thread starter Zumbagirl
- Start date
Zum,
It just depends on how your pool is plumbed. You either have a make-up valve or your Return valve is offset.
Show us some pics of your equipment pad especially around the plumbing sending water back to your pool and Spa.
Thanks,
Jim R.
It just depends on how your pool is plumbed. You either have a make-up valve or your Return valve is offset.
Show us some pics of your equipment pad especially around the plumbing sending water back to your pool and Spa.
Thanks,
Jim R.
We figured it out. We just reduced the Pool Return valve and it increased the spa flow. I'm thinking there's a set amount of flow/pressure distributed between the pool, bubbler and spa. Reduce one and it increases the others.
Thanks for your help.
Thanks for your help.