Hello all,
I was trying to run a backwash cycle through my pump so I started by turning off the pump from a switch located by the pump. It turned off, I moved it to the backwash position. When I flipped the switch back on there was no power and the pump would not start. There is no power to the control module and the breaker is not tripped. I’ve tried turning the breaker on and off and flipped the switch to both positions and still no power. Any suggestions on what could be the issue?
I was trying to run a backwash cycle through my pump so I started by turning off the pump from a switch located by the pump. It turned off, I moved it to the backwash position. When I flipped the switch back on there was no power and the pump would not start. There is no power to the control module and the breaker is not tripped. I’ve tried turning the breaker on and off and flipped the switch to both positions and still no power. Any suggestions on what could be the issue?