Hi guys, Im new to all this. I installed a new Pentair Superflo 1.5hp variable speed pump. I set up the pump to run at different speeds. When my controller sends power to the pump, the pump doesnt turn on autimatically and doesnt run the programmed sequence unless I hit the programed button. The issue is that the speed is at 0 rpms when started and it doesnt run the first step (speed 1). Why desnt it run the programmed sequence automatically? See picture. Any help will be appreciated. Thanks
Pump not turning on automatically.
- Thread starter kenuel80
- Start date
- May 3, 2014
- 62,764
- Pool Size
- 6000
- Surface
- Fiberglass
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-40
Welcome to the forum.
The pump is designed to have constant power to it. It should not be switched on and off by a timer or other device.
The pump is designed to have constant power to it. It should not be switched on and off by a timer or other device.
- Jul 21, 2013
- 65,846
- Pool Size
- 35000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60