- Jul 31, 2010
- 95
TFP Team:
I have a strange issue i need help with. I recently did a self-install of a Circupool RJ45. I wired it into the low side of my Intermatic timer. Now when i run my pump on Hi, and the low switch on the timer box is off, the pump makes a strange noise. The noise doesn't occur if i turn off the SWG, or if i turn on the Lo switch at the timer box (while the pump continues to run on hi).
I have posted a video of this, and i also took a picture of the wiring at the timer. The wires with the blue spade collars are the wires for the SWG.
Please let me know your thoughts. I can provide any other info needed. Thanks in advance.
Here's a video demo of the issue:
http://youtu.be/w8t6R39-hEo
Here's the timer wiring:
I have a strange issue i need help with. I recently did a self-install of a Circupool RJ45. I wired it into the low side of my Intermatic timer. Now when i run my pump on Hi, and the low switch on the timer box is off, the pump makes a strange noise. The noise doesn't occur if i turn off the SWG, or if i turn on the Lo switch at the timer box (while the pump continues to run on hi).
I have posted a video of this, and i also took a picture of the wiring at the timer. The wires with the blue spade collars are the wires for the SWG.
Please let me know your thoughts. I can provide any other info needed. Thanks in advance.
Here's a video demo of the issue:
http://youtu.be/w8t6R39-hEo
Here's the timer wiring: