I have a leak from my pump. Sad face.
What do I do - turn off the valves for the skimmer and sump and set the multiport on the filter to closed.
Then drain the two drain valves on the pump.
Slacken the metal band and extract the motor but Do I need to undo the plumbing otherwise?
it’s wet on the metal band so I wonder if that gasket is leaking - what’s the best approach to diagnosis the leak cause?
What do I do - turn off the valves for the skimmer and sump and set the multiport on the filter to closed.
Then drain the two drain valves on the pump.
Slacken the metal band and extract the motor but Do I need to undo the plumbing otherwise?
it’s wet on the metal band so I wonder if that gasket is leaking - what’s the best approach to diagnosis the leak cause?
Attachments
Last edited: