PSI warning on RJ45+

[EndlessSummerAZ]

I see the RJ45+ has the 10 PSI warning. I’ve got my aerator, returns and a waterfall valve after the cell. How can I determine if closing/opening various valves will breach the PSI warning limit? The waterfall valve goes to 3 sheer descents. Small pool so I only have 1 aerator and 4 returns.

 

[mknauss]

The SWCG is after the filter. It is unlikely you will exceed that pressure.

This has been discussed before. Circupool SWG - Further Reading

 

[EndlessSummerAZ]

The SWCG is after the filter. It is unlikely you will exceed that pressure.

This has been discussed before. Circupool SWG - Further Reading

I saw the reading which is what made me question it. The valves are after where the cell will be installed.

 

[Texas Splash]

I suspect if it was something you felt strongly about monitoring you would have to install a pressure gauge in your return line. T-fitting with 1/4" to accommodate the gauge. I've seen some other members do it for various reasons.