Psi after adding DE to sand filter

JillKC

Silver Supporter
Aug 23, 2019
22
Fredonia, NY
Pool Size
17000
Surface
Vinyl
Chlorine
Liquid Chlorine
Hello. I added about 1/2 C DE to my sand filter after having a few days of algae developing & cloudy water. The psi is normally 15. After 2 hrs the psi is 20. Is that worrisome? Should I shut off the pump/filter?
My plan was to run it a bit longer than normal & backwash again in the AM. Now I'm worried I might overtax the equipment.
 
Hello. I added about 1/2 C DE to my sand filter after having a few days of algae developing & cloudy water. The psi is normally 15. After 2 hrs the psi is 20. Is that worrisome? Should I shut off the pump/filter?
My plan was to run it a bit longer than normal & backwash again in the AM. Now I'm worried I might overtax the equipment.
Most pool equipment is rated to 50psig.
 
  • Like
Reactions: JillKC
Thread Status
Hello , This thread has been inactive for over 60 days. New postings here are unlikely to be seen or responded to by other members. For better visibility, consider Starting A New Thread.