Due to the recent failure of my pool pump, we replaced the pump with a Jandy VSP 2 HP epump. Our pool is 17,000 gallons, and we are located in Houston.
I was wondering if anyone has any suggestions for the ideal RPMs I should program into the VSP for different times of the day, such as low RPM for filtration from hours xx -- xx, then higher RPM for more of a cleaning circulation during the hours xx -- xx, etc.
The installer programmed it to simply run at 2700 RPM from 8AM to 7PM every day, but I think that fails to take full advantage of the VS nature of the pump.
Thanks.
I was wondering if anyone has any suggestions for the ideal RPMs I should program into the VSP for different times of the day, such as low RPM for filtration from hours xx -- xx, then higher RPM for more of a cleaning circulation during the hours xx -- xx, etc.
The installer programmed it to simply run at 2700 RPM from 8AM to 7PM every day, but I think that fails to take full advantage of the VS nature of the pump.
Thanks.