- May 3, 2014
- 58,570
- Pool Size
- 6000
- Surface
- Fiberglass
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-40
Go to Effects of adding chemicals. Select SWCG. You can vary % and run time to meet a FC demand.
Proper Filter Run Time When Cycle is Interrupted
- Thread starter NY Smokeater
- Start date
- Jun 14, 2017
- 64
- Pool Size
- 17000
- Surface
- Vinyl
- Chlorine
- Salt Water Generator
- SWG Type
- Hayward Aqua Rite (T-15)
Sorry for disappearing guys. It's been a hellish work week.
I did another full round of testing. Here is what I have:
TC K-1000 <5
FC 7.5
CC .5
TC 8
pH 7.5
TA 70
CYA 40 (much better but I think it needs more?)
Water remains crystal clear. I'm running the filter and SWG nightly at 10p for 5 hours. This elimimated my issue with the session being interrupted as I thought I had to run it during the daylight hours. Perhaps I should run the filter a little longer? We did have a bit of rain over the past few days so I'm wondering how much that factors in to the numbers?
I did not conduct an overnight chlorine loss test unfortunately. I may try it tonight. Thanks guys/gals.
I did another full round of testing. Here is what I have:
TC K-1000 <5
FC 7.5
CC .5
TC 8
pH 7.5
TA 70
CYA 40 (much better but I think it needs more?)
Water remains crystal clear. I'm running the filter and SWG nightly at 10p for 5 hours. This elimimated my issue with the session being interrupted as I thought I had to run it during the daylight hours. Perhaps I should run the filter a little longer? We did have a bit of rain over the past few days so I'm wondering how much that factors in to the numbers?
I did not conduct an overnight chlorine loss test unfortunately. I may try it tonight. Thanks guys/gals.