I have a copy of firmware version 4.47 for prologic PRO board. glx-pcb-pro. I’ll upload when on my pc tomorrow
Last edited:
ProLogic firmware version 4.47
- Thread starter sph01443
- Start date
zip file below contains the updated 4.47 firmware for PRO board.
MPLAB X IPE settings:
Settings>Advanced mode - password microchip
Family: Advanced 8 – Bit (pic18)
Device: PIC18F4685
Tool: pickit 3
Power tile on left side: check box to Power using tool. Make sure voltage is set to 4.75V (5V didn’t work for me when I tried)
File/ Import / hex / navigate to file location / program
MPLAB X IPE settings:
Settings>Advanced mode - password microchip
Family: Advanced 8 – Bit (pic18)
Device: PIC18F4685
Tool: pickit 3
Power tile on left side: check box to Power using tool. Make sure voltage is set to 4.75V (5V didn’t work for me when I tried)
File/ Import / hex / navigate to file location / program
