Pressure Guage

[KristaM78]

My pressure guage always reads 0 unless u run over 2000 RPM. I just bought this new one from TFtestkit site. I was so excited to get it. I didn’t pay attention to the fact that it is a rear mount. My current guage mounts vertically so the stem is under the fiat he not behind it. Can I use this? It will be a nuisance as I would have to walk over to the equipment and look down to see it rather that look across the pool.

 

[Rancho Cost-a-Lotta]

It's not optimal but you could use a brass elbow to flip it 90's. It costs probably as much as it would to return the gauge.

 

[KristaM78]

It's not optimal but you could use a brass elbow to flip it 90's. It costs probably as much as it would to return the gauge.

Ok. Bummer. I was excited about this gauge.

 

[markayash]

You will like the new gauge, like rancho said you could get an elbow but would be about the same cost just to reorder the correct one.
I replaced mine a couple of years ago and love the one tfp sells. Very precise and easy to read.

 

[sktn77a]

It will work fine as-is. Just look at the pressure from above, not from the side!