Pre pool opening (white water mold)

Also I just checked my pool manufactures site (Thursday’s) recommended is 80–120 for ta
So I feel a little better about letting it do its own thing . Pm suggests 50-90
So I thought I was like 3-4x over
 
Well that was helpful 🤣
I KNOW !!!!!! And why I'm always on the fence. I'm all for it if somebody is Gung Ho about it, and all for it if they're Meh.
Someone told the hub about a “skim-a-round”
Is that something I want ?
Search for it above. There's a ton of mixed reviews. That makes me a no for my pool.

For you with an autocover it's a lol no. (IMO).
recommended is 80–120 for ta
The industry expects you to use pucks which tank the PH with all the CYA(cid). So the industry recs a higher TA.

Stop using or never have used pucks and the equation changes, but they trudge along ignorantly.
 
  • Like
Reactions: Badpoolmom
I’m freaking out just a tad. I did add the acid earlier. Mixed brushed etc. about an hour later closed the cover (to mow) when I opened back up there is a shiny film all over the water that I have not seen. Is this at all related to acid
This is the smallest area but the best pic I could get
IMG_5427.jpeg
 
I’m freaking out just a tad. I did add the acid earlier. Mixed brushed etc. about an hour later closed the cover (to mow) when I opened back up there is a shiny film all over the water that I have not seen. Is this at all related to acid
This is the smallest area but the best pic I could get
View attachment 579283
Could be sunscreen, body oils or whatnot.
MA isn’t oily so I don’t think it has anything to do with that. The skimmer sock will catch it. & the fc will break it down.
 
You should be good. But it's not going to hurt either if you want to use up the rest of the bottle. You can be our Guinea pig. :)

Is it a couple of doses worth or a two year supply ?
 
it’s a 6 oz container so 2 treatments for my size pool (1 oz per 3000 gallons ish)

I’ll be the Guinea pig long as you promise it’s not gonna hurt anything 🤣
Run it after sand change ?
Instructions say once every 30 days
I think I did it around May 15th
 
  • Like
Reactions: Mdragger88

Enjoying this content?

Support TFP with a donation.

Give Support
While you could have taken the whole thing off like a 7ft daddy long legs spider, it'll be real nice to only have to deal with the MPV itself. (y)
He keeps saying it doesn’t look too bad
That's OK. We needed to know and there was only one way to find out. Get a good feel for what they're doing. Next time you'll be entirely capable because it's pretty simple once you get over your own hangups about it. :)
 
Things are goin well here.
Pm gives me fc range 3-7 (3 is lava, got it) so is 5 the sweet spot, so to say?

For instance I just vacuumed and tested. My fc is 7.5. Pool will be open but unused today. Full sun high 76.

Just test again this evening and add back to 7 or more like 5?
 
Your expected daily loss is your guide, and it can vary widely because you have 2 pools. (covered/uncovered). *Then* the point in the season comes into play also.

Have the pool open all week because company is visiting or you're just around to enjoy it? Dose for the recent full sun loss.

Have a busy week and it's covered the whole time? Then you'll lose alot less each day so dose accordingly for that.

The key is that 3 is lava. :salut:

Heck. 5 is lava at my house. If I know going to be busy for a spell and need it hands off for a few days, 7 is lava.
 
  • Like
Reactions: Mdragger88

Enjoying this content?

Support TFP with a donation.

Give Support