Hootz
Bronze Supporter
- Feb 5, 2018
- 374
- Pool Size
- 24000
- Surface
- Vinyl
- Chlorine
- Salt Water Generator
- SWG Type
- CircuPool RJ-60 Plus
Hot water poured against the liner will allow that sag to be snapped back into the track.
I was thinking after I patch and roll, I can place a large, flat steel plate on top of the patch with a 25 lb plate on top of that as it cures. Is that a good idea?
It sounds like you may have a Hybrid Pool where a liner was placed into when it began leaking.
Hybrid Pools - Further Reading
www.troublefreepool.com