Possible cracked bulkhead fitting on Hayward 200 Sand Filter

harclerode76

New member
Apr 29, 2024
4
Champion, OH
We started opening the pool this past weekend and I removed the bulkhead fittings on our Hayward 200 sand filter to clean around them and those openings. When I tightened the the bottom one (where the longer elbow of the variflow valve goes) on the last turn I heard a CRACK and the fitting "slipped" and got a little looser, one or two turns tightened it back up and stayed tight.
Once I turned the pool on, a small trickle of water started coming from that area.
So, did I crack my fitting or my bulkhead?
Thanks in advance!
 
We started opening the pool this past weekend and I removed the bulkhead fittings on our Hayward 200 sand filter to clean around them and those openings. When I tightened the the bottom one (where the longer elbow of the variflow valve goes) on the last turn I heard a CRACK and the fitting "slipped" and got a little looser, one or two turns tightened it back up and stayed tight.
Once I turned the pool on, a small trickle of water started coming from that area.
So, did I crack my fitting or my bulkhead?
Thanks in advance!
The bulkhead nut is the most fragile part and likely what cracked.
 
That's what my thought is. The bulkhead itself seems very solid.
When I replace it, how tight should it be? Hand tight? As tight as it'll get? Somewhere in between?
Thanks!
I don't think that the nut itself is replaceable on that MPV. It comes as part of the assembly, unfortunately. You may need to get an entirely new valve. Those thread are proprietary to Hayward, not a standard split-nut type repair.
 
I don't think that the nut itself is replaceable on that MPV. It comes as part of the assembly, unfortunately. You may need to get an entirely new valve. Those thread are proprietary to Hayward, not a standard split-nut type repair.
Ah, I see. It's not the valve that cracked, it's where the valve attaches to the filter. The fitting that screws into the filter that the valve then gets pushed in and screwed on.
I highlighted the pieces from the owner's manual.
 

Attachments

  • Screenshot_20240430_074506_Acrobat for Samsung.jpg
    Screenshot_20240430_074506_Acrobat for Samsung.jpg
    241.4 KB · Views: 7
Thread Status
Hello , This thread has been inactive for over 60 days. New postings here are unlikely to be seen or responded to by other members. For better visibility, consider Starting A New Thread.