Hey guys,
Im have not used the lights in the pool for many years as I though it had bad bulbs. This weekend I decided to replace the bulbs and when I went and turned on the breaker it immediately tripped.
My son was by the pool looking at the lights and he said that when I turned the CB on the lights flashed for a sec (Both).
I disconnected the CB from the panel and it stays switched on. I connected it all back and tried again and again they both flashed on and the CB tripped.
When I turn the CB on I do hear the 20amp relay activating.
Anyway to check the Relay to make sure that is not the problem?
Also what other thing can I do to figure out the issue I am having?
Any help is greatly appreciated.
Im have not used the lights in the pool for many years as I though it had bad bulbs. This weekend I decided to replace the bulbs and when I went and turned on the breaker it immediately tripped.
My son was by the pool looking at the lights and he said that when I turned the CB on the lights flashed for a sec (Both).
I disconnected the CB from the panel and it stays switched on. I connected it all back and tried again and again they both flashed on and the CB tripped.
When I turn the CB on I do hear the 20amp relay activating.
Anyway to check the Relay to make sure that is not the problem?
Also what other thing can I do to figure out the issue I am having?
Any help is greatly appreciated.