Pool resurface in Georgia

Jump to latest Follow Reply
K

kekin

0
Aug 11, 2015
23
cumming, ga
Pool Size
14000
Surface
Plaster
Chlorine
Salt Water Generator
SWG Type
Jandy Truclear / Ei
The plaster is 11 years old and seems to be getting thin. Also it has a rough sandpaper feel to it. I'm planning on going with Aquabright. I will report back on the progress. Hopefully everything goes smoothly (pun intended).
Thanks to TFP, I have learned more about pools than I ever expected.
 
36619636631_4fb6b31768_c.jpg
 
Another before picture. It's difficult to see where the gunite is showing in the picture.
35994077393_771c6a552d_c.jpg

- - - Updated - - -


One more before picture. When it was almost finished draining. I had never actually seen this pool without water. It looks deeper this way and the steps look bigger.
36738284846_ce1486fd8d_c.jpg
 
Friday after the Aquabright installation. We decided to go with the "Ice Ice Bay Bay" color. It looks beautiful and feels smooth. Hoping it lasts a long time.
35968457374_e12bc819d8_c.jpg

35968464704_53496937d6_c.jpg

36406275570_9ab67252f6_c.jpg
 
Thank you mickey4paws

- - - Updated - - -

Thanks bdavis466. Your information on Aquabright has definitely helped me. The Aquabright installer told me the calcium level should be around 180. Is this what you recommend?
 

Enjoying this content?

Support TFP with a donation.

Give Support
I guess CH is currently zero because when testing it immediately turned blue instead of red. And TA is 20. CYA is zero. Looks like I have some chemicals to add.
 
You must log in or register to reply here.
Thread Status
Hello , This thread has been inactive for over 60 days. New postings here are unlikely to be seen or responded to by other members. For better visibility, consider Starting A New Thread.
Top Bottom
Back
Jump to latest Follow Reply