It’s been a couple of years since we’ve had the pool up. To refresh my skills I’ve done a bit of reading. Here is where I am at why can’t I get a CYA Reading? Does something seem off with readings?
Using Taylor 2006C Kit
Filled pool 6000gal from irrigation system filtered canal water, filtered clean enough I can use drip system.
Cleaned filled and backwashed both sand filters
Circulated system for 4 hours
Vacuumed and cleaned pool
Tested pH was 7.8 brought down to 7.2 with muriatic acid
FC 0
CYA 0
CC 0
Added 2lbs of CY @ 56.44%
Circulated for 1 hour
FC 25
CYA 0 or I can’t figure out how to get a proper reading
CC 0
Using Taylor 2006C Kit
Filled pool 6000gal from irrigation system filtered canal water, filtered clean enough I can use drip system.
Cleaned filled and backwashed both sand filters
Circulated system for 4 hours
Vacuumed and cleaned pool
Tested pH was 7.8 brought down to 7.2 with muriatic acid
FC 0
CYA 0
CC 0
Added 2lbs of CY @ 56.44%
Circulated for 1 hour
FC 25
CYA 0 or I can’t figure out how to get a proper reading
CC 0