- Mar 20, 2021
- 29
- Pool Size
- 20000
- Surface
- Vinyl
- Chlorine
- Salt Water Generator
- SWG Type
- CircuPool Universal40
Hello All,
Today marks the first day my pool has been open since I’ve found this wonderful resource. Here are my first set of test results:
FC: 9.5
CC: 0
Ph: 7.8
TA: 100
CH: 130
CYA: 50
Salt: 2600
Temp: 54*
I’m thinking the first thing I need to do is get the salt up as I have a SWG and I know it has to be off for 24hrs after adding salt. Is that the first thing you would do?
The company that opened the pool dumped 4lbs of an unknown shock in and placed 2 unknown chlorine tabs into the skimmer basket.
I took the chlorine tabs out and am debating putting them back into the skimmer basket. It seems like I could use some more CYA and these would hold my chlorine up while I’m waiting for the salinity can rise so I can fire up the SWG. What would you all do?
Should I be concerned at this point with the TA? What about the pH?
Thanks all!
Today marks the first day my pool has been open since I’ve found this wonderful resource. Here are my first set of test results:
FC: 9.5
CC: 0
Ph: 7.8
TA: 100
CH: 130
CYA: 50
Salt: 2600
Temp: 54*
I’m thinking the first thing I need to do is get the salt up as I have a SWG and I know it has to be off for 24hrs after adding salt. Is that the first thing you would do?
The company that opened the pool dumped 4lbs of an unknown shock in and placed 2 unknown chlorine tabs into the skimmer basket.
I took the chlorine tabs out and am debating putting them back into the skimmer basket. It seems like I could use some more CYA and these would hold my chlorine up while I’m waiting for the salinity can rise so I can fire up the SWG. What would you all do?
Should I be concerned at this point with the TA? What about the pH?
Thanks all!