New house with pool (still learning about this pool) and we flipped the pool light on. Its a blue led. The problem is I cant figure out a way to make it change to a different color. Could it just be only a blue light (led)? Usually most led are mult colored RGB and can be made to turn into any color.
Pool light (led) only Blue
- Thread starter s_dubb
- Start date
- May 3, 2014
- 58,656
- Pool Size
- 6000
- Surface
- Fiberglass
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-40
Color changing systems use either the on-off sequence of the switch or an automation system to change the lights.
You have an Easytouch. Is the light controlled by it? If so, you go into the Menu to Lights and you can change the colors there.
You have an Easytouch. Is the light controlled by it? If so, you go into the Menu to Lights and you can change the colors there.
Yes I do have an Easytouch, and every time I go into the setting to change the light color it stays blue. I have tried red, and green, but nothing will change the color.
- Jun 7, 2017
- 9,157
- Pool Size
- 29000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Jandy Aquapure 1400
But the light does turn on/off correct? If so, could be bad relay/electronics in the light.
Yes the light does turn on and off. I was somehow able to add the Intellibrite lights to the display, and I could here the relays clicking away when choosing a color but that did nothing
Are you sure you have a color changing LED? Could be just a light with a blue lens.
Last edited: