About a month ago I noticed my pool light was not working and noticed that my GFCI was tripped. I tried to reset it but it would not reset. So I replaced the GFCI. I hooked my line power up and the my my secondary (load/Pool light) hit my
breaker and the new GFCI tripped and would not reset. So I did a little experiment and disconnected the load power and had only the line power going to the GFCI. With just line power connected it did not trip and I plugged in several
things which worked without tripping the GFCI. Anyways I have ideas of what could be wrong but I'm not 100% sure. Any help would be appreciated. The pool and equipment is 10 years old. My light equipment is FiberStars 6004 Illuminator.
breaker and the new GFCI tripped and would not reset. So I did a little experiment and disconnected the load power and had only the line power going to the GFCI. With just line power connected it did not trip and I plugged in several
things which worked without tripping the GFCI. Anyways I have ideas of what could be wrong but I'm not 100% sure. Any help would be appreciated. The pool and equipment is 10 years old. My light equipment is FiberStars 6004 Illuminator.