Pool chemistry help

darrenbailey

Member
Aug 28, 2020
5
Houston, TX
Pool Size
20000
Surface
Plaster
We have just completed our first pool and I'm working with the builder to get the chemistry correct. I have a Taylor 2006C kit and have just done my first samples and I'm trying to enter them into the Pool Math app with no luck. I have an Apple phone with iOS 14.3. When I enter the value of the reading I don't see a check box to save or anything. Any help is appreciated.

FC = 2.4
pH = 7.5
TA = 130
CH = 100
CYA <30
CSI ~.23
 

Attachments

  • pool day.jpg
    pool day.jpg
    674.1 KB · Views: 7

Mdragger88

Bronze Supporter
Jun 1, 2018
1,763
Hernando, Ms
Pool Size
26000
Surface
Vinyl
Chlorine
Salt Water Generator
SWG Type
Intex Krystal Clear
0EF369F6-6F5F-4C76-9E81-5AC327C29E0A.jpeg
289CBFAD-9E0F-41A9-B9D4-ECE0FC8B8528.jpeg
72D97A9D-2983-4E69-A64E-307275F6EB2B.jpeg
I believe w/ out a subscription you can only save 1 log. Try these steps & we’ll see if it shows up.
 

Mdragger88

Bronze Supporter
Jun 1, 2018
1,763
Hernando, Ms
Pool Size
26000
Surface
Vinyl
Chlorine
Salt Water Generator
SWG Type
Intex Krystal Clear
When u need to make a chemical adjustment you will click on the parameter you wish to adjust (like fc) in the overview screen then it will open a new screen where u choose strength etc. & you can log that addition with the button at the bottom.
 
Thread Status
Hello , There was no answer in this thread for more than 60 days.
It can take a long time to get an up-to-date response or contact with relevant users.