Folks,
Thanks for the tips on hose replacement. I now have new leader / standard hoses, swivels and back up valve. It’s running a lot better. However….a question…on overall hose length….
The manual says “overall hose length to the furthest point in pool to be plus or minus six inches from the edge”.
I have something like 30 inches laid over the furthest pool coping tile. It will have always been this way as the new hoses are same length as the old. So before I start chopping away at the hoses:
1. Is the measurement taken with the hose laid floating on the pool surface and the cleaner disconnected, I guess it has to be.
2. What problems would this additional hose length cause? Looping of the hose perhaps? I get plenty of that.
3. Who has the hose cut to Polaris specs and does everything work ok?
Thanks in advance.
Thanks for the tips on hose replacement. I now have new leader / standard hoses, swivels and back up valve. It’s running a lot better. However….a question…on overall hose length….
The manual says “overall hose length to the furthest point in pool to be plus or minus six inches from the edge”.
I have something like 30 inches laid over the furthest pool coping tile. It will have always been this way as the new hoses are same length as the old. So before I start chopping away at the hoses:
1. Is the measurement taken with the hose laid floating on the pool surface and the cleaner disconnected, I guess it has to be.
2. What problems would this additional hose length cause? Looping of the hose perhaps? I get plenty of that.
3. Who has the hose cut to Polaris specs and does everything work ok?
Thanks in advance.