13,000 gallon round , sand filter , above ground vinyl liner .
Fc 4
Cc 0
Ph 8.2
Alkiliinity 90
Cya 40
Calcium/hardness 150
Phosphate 550
I put in half a box of borax mule and 4 hours later this was the test results . I’m still learning here but I love this site . Seems the ph is high and the alkalinity is low. Which order should I correct these in ? And advice on the phosphate too please . Thanks guys
Fc 4
Cc 0
Ph 8.2
Alkiliinity 90
Cya 40
Calcium/hardness 150
Phosphate 550
I put in half a box of borax mule and 4 hours later this was the test results . I’m still learning here but I love this site . Seems the ph is high and the alkalinity is low. Which order should I correct these in ? And advice on the phosphate too please . Thanks guys