Pentair Whisper Flo VST

letme

New member
Jan 12, 2025
1
New Mexico
We are having a VST pump installed indoor pump room. It is a replacement. The location is limited and already crowded and the control panel box really needs to be turned 180 degrees so it opens opposite how it does from the factory. Is it possible to turn the control box facing the opposite direction?
 
Do you have the exact pump model #...

Most of the whisperflow's drive kit plug into the motor on the rear, so orienting it the other way would reverse pins 1 & 3. The bolt holes are also a 2 and 1 pattern.

1736738891961.png

It may be possible that the drive cover can be rotated 180 degrees. The drive kit cannot. You will need the EXACT pump part number. Some can be changed, some cannot.

I would call pentair to confirm for YOUR model #
 
Last edited:
1736802493535.png
1736802444611.png

1736802654434.png


1736802714152.png

1736802769906.png




1736802806194.png
 
Pentair Drive Cover With Control Panel For SuperFlo and WhisperFlo VST Pumps | RS- 485 | 356279.

It looks like the drive cover is not perfectly symmetrical, so it probably cannot be rotated.

You could probably run 3 wires from the drive to the motor and mount the drive wherever you want if the pump is inside.

1736805862222.png
 
  • Like
Reactions: PoolStored
If you mount the drive somewhere other than the motor, you will need to make sure that the wire connections are safe and secure including protection from water and debris.

This is not a recommendation to do this.

Do your own research before deciding what to do.

All decisions are at your own risk based on your own research and your own assessment of the suitability of the modification.
 
Thread Status
Hello , This thread has been inactive for over 60 days. New postings here are unlikely to be seen or responded to by other members. For better visibility, consider Starting A New Thread.