Pentair Warrior SI - No power at robot

evamor

Active member
Mar 2, 2021
37
DFW
My warrior si randomly stopped working recently and doesnt look like it's getting power at the robot. The control box has power and the lights go blue to start a cleaning cycle but the flashing light on the robot doesnt come on and he seems dead. I've checked the motor and propellers to make sure nothing is clogging it up. The app states "No Mode" when its started. Has anyone come across this and know of a fix? Out of warranty unfortunately and really not wanting to buy a new robot, prices look insane from initial shopping around.
 
Eva,

How old is the robot??

Sounds like the cable might be bad.. Most likely at the swivel..

Unfortunately, it could also be a flooded motor box... :cry:

You can buy and replace the cable, but they are expensive, and I would not invest any money in a robot that is over 3 years old.

See this review...


Thanks,

Jim R.
 
Eva,

How old is the robot??

Sounds like the cable might be bad.. Most likely at the swivel..

Unfortunately, it could also be a flooded motor box... :cry:

You can buy and replace the cable, but they are expensive, and I would not invest any money in a robot that is over 3 years old.

See this review...


Thanks,

Jim R.

It's 2-3 years old. I can't find my original order confirmation so out of luck on warranty and surely it's 2 years+ old anyway.

I was afraid that it was the cable :( Guess it's time to find a new replacement.