- May 12, 2012
- 191
- Pool Size
- 31000
- Surface
- Vinyl
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
This filter does not have a manual bleeder valve, so I just want make sure that before I open up the filter for any maintenance, that there is nothing I need to do. I have tried to speak with technical support at Pentair without any success. It seems this filter automatically purchase air on start up after cleaning pump basket, etc. I would assume that I could just open up the filter and check O-rings or whatever needs to be checked but I also don’t want to assume anything and blow my head off.
. Anyone out there have any thoughts?
