I have four Pentair laminar deck jets. Today one of them started “thumping” every second. I know this is a feature on the deck jets where it shoots out water every few seconds, but the other three just have a steady stream. Does anyone know how to turn off the thumping feature on just one deck jet?
Pentair Laminar deck jet question
- Thread starter cjhud32
- Start date
- Jul 21, 2013
- 52,927
- Pool Size
- 35000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
- Jul 21, 2013
- 52,927
- Pool Size
- 35000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
- Jul 21, 2013
- 52,927
- Pool Size
- 35000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
- Jul 21, 2013
- 52,927
- Pool Size
- 35000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
Are your lamimar lights setup on the ET with the thumper function? See page 23 in https://www.pentair.com/content/dam...ytouch-control-system-8-and-4-users-guide.pdf
They are set up with thumper feature. I tried all of the above and one deck jet is still stuck in the thumper mode. Really strange so I have no idea.
- Jul 21, 2013
- 52,927
- Pool Size
- 35000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
Are all the lights connected to one transformer?
What you may need to do is isolate the one thumping light on the transformer and manually pulse the power on the light to reset it.
What you may need to do is isolate the one thumping light on the transformer and manually pulse the power on the light to reset it.