Something funky happened after I cleaned my clorinator.
My Pentair IC8 controller will not automatically start my pentair pump on schedule. The pump starts fine from the controller manually, but it will not run the pump in "pool", "Cleaner" or "Spa" mode.
I am completely confused.
I am getting "No Comm" from the Intelliflo. I cannot read the status from the Intelliclor. The Wireless will not hook up to the main controller. I am getting a 145 error code on the IC8 during self test.
I can control the Components manually, the pool cleaner pump fires normally and on schedule and the spa air pump works normally.
My Pentair IC8 controller will not automatically start my pentair pump on schedule. The pump starts fine from the controller manually, but it will not run the pump in "pool", "Cleaner" or "Spa" mode.
I am completely confused.
I am getting "No Comm" from the Intelliflo. I cannot read the status from the Intelliclor. The Wireless will not hook up to the main controller. I am getting a 145 error code on the IC8 during self test.
I can control the Components manually, the pool cleaner pump fires normally and on schedule and the spa air pump works normally.