Pentair ET4 Board Connectors

[FlaMike]

Does anyone know what kind of connectors Pentair uses on ET 4 controller boards for relays, valve actuators, and low voltage transformers?

Thanks!

 

[Jimrahbe]

Mike,

I bet Tom knows... Calling @ogdento

Thanks,

Jim R.

 

[ajw22]

Why do you ask?

Valve Actuators - Further Reading

www.troublefreepool.com

The connector used on actuators is the JST XH 2.54MM 3 Pin available on Amazon and electronic supply houses.

 

[ajw22]

Terminal blocks are…

Metz part number 31007104, Digi-key part number 1849-1116-ND is the 4 pin block.

Metz part number 31007106 is the 6 pin block. Digi-Key Part Number 1849-1107-ND.

Metz part number 31007110 is the 10 pin block, Digi-Key Part Number 31007110-ND

 

[ajw22]

Relay connectors are 2.5mm-pitch 2-pin female JST XH-style connector.

Pololu - 2-Pin Female JST XH-Style Cable (15cm)

This 6" (15cm) cable has two 26AWG conductors with a 2.5mm-pitch 2-pin female JST XH-style connector. The spacing is very close to 0.1", which means this connector will work with 0.1" male header pins and standard perfboards and solderless breadboards. The other ends of the wires are...

www.pololu.com

 

[ajw22]

What low voltage connector are you looking for?