Have a Pentair Easytouch controller. No spa and 3 water features. 2 of the water feature actuators are on the A and B valve port. Is it possible to add an actuator for the other water feature using one of the spa intake or return port?
Pentair actuator valves
- Thread starter cprrry1
- Start date
1,
Yes, but... The Intake and Return ports are not programable.. They will only move a valve when you switch between the Pool and Spa modes.
Thanks,
Jim R.
Yes, but... The Intake and Return ports are not programable.. They will only move a valve when you switch between the Pool and Spa modes.
Thanks,
Jim R.
Thanks for the reply. Is there any issues with running in spa mode with no spa and would I still be able to control the other 2 actuators at the same time?
C,
As long as you don't have an actual spa, it won't make any difference in how the pool works.
Thanks,
Jim R.
As long as you don't have an actual spa, it won't make any difference in how the pool works.
Thanks,
Jim R.
Thanks Jim. Have had the pool for a few years and still learning how it all works. Pool builder and I are not on talking terms so he is no help.
