Newbie pool owner here. We just installed (ourselves) a 27' round steel pool and are currently filling it. We had a good wind gust while installing the liner, and part of the wall caved in. Everything went back in ok and we continued to fill it. It's got about 12" in it now, and just noticed one of the support pillars/beams is now partially off the paver. The paver must have been kicked/moved when putting the wall back up in a panic. Any way to move this back in place without draining? I do not want to risk that shifting off the paver.
Paver moved under support "beam"
- Thread starter Jkolosewicz
- Start date
- Jul 21, 2013
- 53,144
- Pool Size
- 35000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
Welcome to TFP.
Better to drain it now at 12" and get the leg set correctly then have to drain it when it is full.
What type of pool is it? Please create your signature with details of the pool and equipment you will be installing.
Better to drain it now at 12" and get the leg set correctly then have to drain it when it is full.
What type of pool is it? Please create your signature with details of the pool and equipment you will be installing.
