Hi,
I have an Omnilogic with a T-CELL-3 connected. It always indicates lower salt levels than the Taylor salt test. The cell was previously connected to an Aqua Rite and the salt test was always close to what the Aqua Rite indicated. I have cleaned the cell with MA. I have verified that it's configured as a T-CELL-3 on the Omnilogic. Anyone have any ideas what could cause it to be reading less?
Taylor test: 3400ppm
Current reading from the Omnilogic:
I have an Omnilogic with a T-CELL-3 connected. It always indicates lower salt levels than the Taylor salt test. The cell was previously connected to an Aqua Rite and the salt test was always close to what the Aqua Rite indicated. I have cleaned the cell with MA. I have verified that it's configured as a T-CELL-3 on the Omnilogic. Anyone have any ideas what could cause it to be reading less?
Taylor test: 3400ppm
Current reading from the Omnilogic:
| Cell Temp: | 89.7°F | Cell Voltage: | 25.09 V | |
| Instant Salt: | 2557 ppm | Cell Current: | 3.13 A | |
| Average Salt: | 2653 ppm | Cell Type: | T-Cell-3 | |
| Relay Polarity: | K2 |
