OmniLogic Mystery Alarm

[keclement]

I recently cleaned my Salt Cell which was pretty clean to start with. However, when I reinstalled it I am now getting an error every morning at 9 am when my pump is scheduled to turn on. The mystery to me is that exactly one hour after starting up I get an alert that it is all clear. The only thing that I can tell that is not working during this hour period it my salt water cell. The Instant Salt = 0ppm, Relay Polarity = Off and Cell Current = 0.00A. After one hour everything goes back to normal. Instant Salt = 3609 ppm, Relay Polarity = K1, Cell Current = 8.5 A. Below are the alerts that I receive.

Has anyone encountered this before or know how to fix it?

1. Alarm for " Clement" at Jul 9, 2019 09:04:02, Reason:CHLOR Relay K2 Stuck Open Chlorinator1.
2. Alarm for " Clement" at Jul 9, 2019 09:04:02, Reason:CHLOR Relay K1 Stuck Open Chlorinator1.
3. Alarm for " Clement" at Jul 9, 2019 09:04:02, Reason:T-CELL Current Sensor Short Chlorinator1.
4. Alarm "CHLOR Relay K1 Stuck Open Chlorinator1" is cleared for " Clement" at Jul 9, 2019 10:04:09.
5. Alarm "T-CELL Current Sensor Short Chlorinator1" is cleared for " Clement" at Jul 9, 2019 10:04:09.
6. Alarm "CHLOR Relay K2 Stuck Open Chlorinator1" is cleared for " Clement" at Jul 9, 2019 10:04:09.

 

[JamesW]

If the system is less than 3 years old, file a warranty claim.

 

[keclement]

I recently cleaned my Salt Cell which was pretty clean to start with. However, when I reinstalled it I am now getting an error every morning at 9 am when my pump is scheduled to turn on. The mystery to me is that exactly one hour after starting up I get an alert that it is all clear. The only thing that I can tell that is not working during this hour period it my salt water cell. The Instant Salt = 0ppm, Relay Polarity = Off and Cell Current = 0.00A. After one hour everything goes back to normal. Instant Salt = 3609 ppm, Relay Polarity = K1, Cell Current = 8.5 A. Below are the alerts that I receive.

Has anyone encountered this before or know how to fix it?

1. Alarm for " Clement" at Jul 9, 2019 09:04:02, Reason:CHLOR Relay K2 Stuck Open Chlorinator1.
2. Alarm for " Clement" at Jul 9, 2019 09:04:02, Reason:CHLOR Relay K1 Stuck Open Chlorinator1.
3. Alarm for " Clement" at Jul 9, 2019 09:04:02, Reason:T-CELL Current Sensor Short Chlorinator1.
4. Alarm "CHLOR Relay K1 Stuck Open Chlorinator1" is cleared for " Clement" at Jul 9, 2019 10:04:09.
5. Alarm "T-CELL Current Sensor Short Chlorinator1" is cleared for " Clement" at Jul 9, 2019 10:04:09.
6. Alarm "CHLOR Relay K2 Stuck Open Chlorinator1" is cleared for " Clement" at Jul 9, 2019 10:04:09.

I am happy to report that the issue went away on its own. I am not sure why, but happy it did.