Omnilogic 3-way return valve

[dmcconnell68]

Hi,

I just installed a Hayward Omnilogic and can't figure out how to do something. One a return line, there is a 3-way valve, with one side going to pool returns, and the other side going to spa jets in the pool. I normally keep the valve so that the return goes to all the returns and spa jets. I'm not seeing how to do this with the valve automation. I have the valve actuator connected Valve 1 (Return) on the Omnilogic.

Anyone know if it's possible to configure the Omnilogic to switch to the valve to side A, side B or both?

Thanks,
David

 

[Jimrahbe]

dm,

You can only have two positions with automated valves... Either all A or all B or... A and 50%A and B... or B and 50% A and B...

Thanks,

Jim R.

 

[dmcconnell68]

Thanks Jim. I figured that was the answer.