I will admit I have been remiss in keeping up with the pool. As a pilot, I am gone a week at a time and it seems my kids don't have the time to sweep and run the vac like they have been asked. Now that we are getting ready for summer (91 here in AZ today) we want to get the pool ready to go. Here is what I am dealing with:


Here are my pool water stats:
FC: 6
CC: 0
pH: 7.7
TA: 80
CH: 330
CYA: 80
SALT: 2800
BORATE: 50
TEMP: 66
CSI: -0.41
We started with a good brushing and vacuuming, no good. I then tried to use a soft-sided plastic pool scrubber, won't make a dent in it. Since I am using a SWG, I fo not have any tabs to try as I have read elsewhere. I did read the forum post on dumping like 8 gallons of acid in the pool after shutting all the pumps, etc off but since this is a full plaster pool and that was a person with a pebbletec, I am not sure if it is a good idea.
I guess I am looking for advice as to how to go from here. I don't really want to drain the pool to cure this problem since we just drained and refilled it about 12 to 18 months ago. We are not having any issues with algae, metals, etc - just these stupid stains.
Thanks!


Here are my pool water stats:
FC: 6
CC: 0
pH: 7.7
TA: 80
CH: 330
CYA: 80
SALT: 2800
BORATE: 50
TEMP: 66
CSI: -0.41
We started with a good brushing and vacuuming, no good. I then tried to use a soft-sided plastic pool scrubber, won't make a dent in it. Since I am using a SWG, I fo not have any tabs to try as I have read elsewhere. I did read the forum post on dumping like 8 gallons of acid in the pool after shutting all the pumps, etc off but since this is a full plaster pool and that was a person with a pebbletec, I am not sure if it is a good idea.
I guess I am looking for advice as to how to go from here. I don't really want to drain the pool to cure this problem since we just drained and refilled it about 12 to 18 months ago. We are not having any issues with algae, metals, etc - just these stupid stains.
Thanks!