No Power Lights

[Philo]

My neighbor has a Swim Pure Hayward SWG.

When he firsts turns it on, the red flow light flashes. When the flow is restored the light goes out and NO lights are on.
Readings:
4300
0
100p
0
AL-2
r 1.40

What's up?

Thanks

 

[ajw22]

This is the basic information we need to know in diagnosing a problem:

• Report all readings when you..
  • Move the switch from auto to off and check all of the readings.
  • Move the switch back to auto and recheck the readings.
  • Move the switch to off for a minute and then back to auto and recheck the readings.
• What are the first seven characters of the cell and box serial numbers?
• What is the actual salinity and how are you measuring it?

Pressing the diagnostic button sequentially will display:

• Default salt display
• Pool temp
• Cell Voltage - When not generating, the voltage is about 30 to 32 volts dc. When generating, the voltage drops about 1 volt per amp of current.
• Cell current
• Desired output (% of the knob)
• Instant salinity
• Product name
• Software revision (r.XX)
• Cell type

The Hayward Aquarite Troubleshooting Guidelines explains each reading.

 

[Philo]

It's a T-15 cell
The readings remain the same when I move the switch to auto and back.