I've read some of the older inactive threads that seemed to be similar issue. Tried those suggestions to no avail.
I have a Jandy (Zodiac) Aquapure ei SWG and I'm getting the No flow error, which causes it to not generate chlorine.
I have plenty of flow at the return jets.
I have replaced the Flow sensor - It didn't come with a small PCB, as I've seen others mention...
The Flow sensor did not fix the issue.
I have also cleaned my salt cell with the muratic acid mixture.
I have tried the hard reset via the hidden button to no avail.
My chlorine level is in the high 4000's and it's in the upper 80-90 degree temp.
I'm now adding chlorine manually to control my algae issue.
I'm finding it very hard to get any pool repair company to return my calls, even the company that installed this SWG.
Any help would be greatly appreciated.
I have a Jandy (Zodiac) Aquapure ei SWG and I'm getting the No flow error, which causes it to not generate chlorine.
I have plenty of flow at the return jets.
I have replaced the Flow sensor - It didn't come with a small PCB, as I've seen others mention...
The Flow sensor did not fix the issue.
I have also cleaned my salt cell with the muratic acid mixture.
I have tried the hard reset via the hidden button to no avail.
My chlorine level is in the high 4000's and it's in the upper 80-90 degree temp.
I'm now adding chlorine manually to control my algae issue.
I'm finding it very hard to get any pool repair company to return my calls, even the company that installed this SWG.
Any help would be greatly appreciated.